Documentation

This page has been automatically translated from Polish with the help of DeepL.
We appreciate your understanding if any translation errors occur.

4.8. Subpanel DENSITOMETRIC STRIPS

1. Licensing options and technical support – expand

1. Commercial version – licensing method
2. Technical support

2. About the Impozycjoner A program – expand

      1. Variant A of the Impozycjoner program
      2. Getting started with the program
      3. Program interface

3. Detailed overview of tool panels – expand

      1. F1 IMPOSITION FILES panel
      2. F2 IMPOSITION PARAMETERS pane
               1. First imposition
      3. F3 COLUMN AND ROW SIZE panel
      4. Panel F4 OFFSETS|IMPOSITION OF CUTTING DIE
      5. F5 SPACING BETWEEN COLUMNS/ROWS panel
      6. F6 AUTOMATIC FILLING panel
      7. F7 OUTPUT FILE panel
      8. F8 GRAPHIC ELEMENTS ON THE IMPOSITION SHEET panel
      9. F9 FINAL OPTIONS panel
      10. F10 IMPOSITION OUTSIDE THE IMPOSITION GRID panel
      11. Saving the imposition project
      12. Imposition templates

4. F8 GRAPHICAL ELEMENTS ON THE IMPOSITION SHEET panel

      1. Subpanel CUTTING MARKERS
      2. Subpanel MARKERS FOR CUTTING PLOTTERS
      3. Subpanel CUT-OFF LINES
      4. Subpanel TEXT FRAMES
      5. Subpanel CODES
      6. Subpanel GEOMETRIC FIGURES
      7. Subpanel ELEMENTS IN PDF FORMAT
      8. Subpanel DENSITOMETRIC STRIPS
      9. Subpanel SIDE GUIDE MARKERS
      10. Subpanel REGISTRATION MARKS
      11. Subpanel OFFSET PLATE COLOR MARKINGS (SEPARATION)
      12. Positioning of texts, codes, figures and PDF elements on the imposition sheet
      13. Placing drawn markers on selected sheets and pages

4.8. Subpanel DENSITOMETRIC STRIPS

Important! The F8 GRAPHICAL ELEMENTS ON THE IMPOSITION SHEET panel can be enabled or disabled depending on whether the Activate the panel switch is selected or not. If this panel is disabled, none of the graphical elements specified in this panel will be drawn.


The DENSITOMETRIC STRIPS subpanel allows you to place up to 10 PDF files on a sheet, which are saved in the MyImpozycjoner\CCS folder (from Color Control Strip). It is assumed that these files are densitometric strips. The use of these files is similar to that of the PDF ELEMENTS subpanel. The difference is that the strips cannot be rotated (a strip rotated by 90° would no longer function as a densitometric strip). A densitometric densitometry strip can be placed on a sheet in its original size or cropped to the width of the paper or print area. Regardless of its initial width, it can be further shortened by any value (including negative values). Cropping can be done from the left, right, or both sides. There must be at least one file in the MyImpozycjoner\CCS folder. The strip list contains a pop-up menu for managing the folder contents. The strips used in the project are saved in the project or template file. If these elements are missing when the project is opened, the program recreates them automatically.

The DENSITOMETRIC STRIPS subpanel allows you to place up to 10 PDF files on a sheet, which are saved in the MyImpozycjoner\CCS folder (from Color Control Strip). It is assumed that these files are densitometric strips. The use of these files is similar to that of the PDF ELEMENTS subpanel. The difference is that the strips cannot be rotated (a strip rotated by 90° would no longer function as a densitometric strip).

A densitometric densitometry strip can be placed on a sheet in its original size or cropped to the width of the paper or print area. Regardless of its initial width, it can be further shortened by any value (including negative values). Cropping can be done from the left, right, or both sides.

There must be at least one file in the MyImpozycjoner\CCS folder. The strip list contains a pop-up menu for managing the folder contents.

The strips used in the project are saved in the project or template file. If these elements are missing when the project is opened, the program recreates them automatically.