Documentation

This page has been automatically translated from Polish with the help of DeepL.
We appreciate your understanding if any translation errors occur.

4.1. Subpanel CUTTING MARKERS

1. Licensing options and technical support – expand

1. Commercial version – licensing method
2. Technical support

2. About the Impozycjoner B program – expand

      1. Variant B of the Impozycjoner program
      2. Getting started with the program
      3. Program interface

3. Detailed overview of tool panels – expand

      1. F1 IMPOSITION FILES panel
      2. F2 IMPOSITION PARAMETERS panel
      3. F3 SEQUENCE OF SIGNATURES/SHEETS panel
               1. Exception table
               2. Example entries in the exception table
               3. Additional function of the Exception Table
               4. Reverse numbering of signatures and sheets
               5. Sequence of sheets in the signature
      4. F4 CREEP REDUCTION panel
      5. F5 SPACING BETWEEN COLUMNS/ROWS panel
      6. F6 OUTPUT FILE panel
      7. F7 GRAPHIC ELEMENTS ON THE IMPOSITION SHEET panel
      8. F8 FINAL OPTIONS panel
      9. Saving the imposition project
      10. Imposition templates

4. F7 GRAPHICAL ELEMENTS ON THE IMPOSITION SHEET panel

      1. Subpanel CUTTING MARKERS
      2. Subpanel FOLD MARK
      3. Subpanel COLLATION MARK
      4. Subpanel CUT-OFF LINES
      5. Subpanel TEXT FRAMES
      6. Subpanel CODES
      7. Subpanel GEOMETRIC FIGURES
      8. Subpanel ELEMENTS IN PDF FORMAT
      9. Subpanel DENSITOMETRIC STRIPS
      10. Subpanel SIDE GUIDE MARKERS
      11. Subpanel REGISTRATION MARKS
      12. Subpanel OFFSET PLATE COLOR MARKINGS (SEPARATION)
      13. Positioning of texts, codes, figures and PDF elements on the imposition sheet
      14. Placing drawn markers on selected sheets and pages

5. Folding scheme management – expand

      1. List of folding schemes
      2. Missing folding schemes
      3. Editing folding schemes

4.1. Subpanel CUTTING MARKERS

Important! The F7 GRAPHICAL ELEMENTS ON THE IMPOSITION SHEET panel can be enabled or disabled depending on whether the Activate the panel switch is selected or not. If this panel is disabled, none of the graphical elements specified in this panel will be drawn.

Net size markers, also known as trim markers, are lines drawn usually outside the print area, showing the boundaries of the net size (TrimBox).

Control elements for the appearance of trim markers allow you to:


[1] enable or disable their being draw; [2] differentiate between horizontal (Left/Right) and vertical (Top/Bottom) marker lengths; [3] define the distance of the marker from the TrimBox edge. If the padlock next to the element controlling the distance of the marker from the TrimBox is closed, the distance of the marker from the TrimBox is equal to the bleed value specified in the F2 IMPOSITION PARAMETERS panel. If it is open, the offset of the marker from the TrimBox is adjusted by the element on the left side of the padlock; [4] set the thickness of the marker; [5] draw a frame showing the TrimBox (net size); [6] draw a frame showing the gross size; [7] disables drawing of markers between columns and rows (on clippings) if their size allows it; [8] marks the corners of the TrimBox with 3 mm long lines; [9] draw special extensions of markers showing the bleed value; [10] draw markers on the edges of the spine (center of the 4-page print area) are extended to the edges of the paper; [11] determine on which pages of the sheet and on which sheets the markers are to be drawn (this issue will be discussed in chapter 4.9. Placing drawn markers on selected sheets and pages); [12] determine the colors of the markers.

[1] enable or disable their being draw;

[2] differentiate between horizontal (Left/Right) and vertical (Top/Bottom) marker lengths;

[3] define the distance of the marker from the TrimBox edge. If the padlock next to the element controlling the distance of the marker from the TrimBox is closed, the distance of the marker from the TrimBox is equal to the bleed value specified in the F2 IMPOSITION PARAMETERS panel. If it is open, the offset of the marker from the TrimBox is adjusted by the element on the left side of the padlock;

[4] set the thickness of the marker;

[5] draw a frame showing the TrimBox (net size);

[6] draw a frame showing the gross size;

[7] disables drawing of markers between columns and rows (on clippings) if their size allows it;

[8] marks the corners of the TrimBox with 3 mm long lines;

[9] draw special extensions of markers showing the bleed value;

[10] draw markers on the edges of the spine (center of the 4-page print area) are extended to the edges of the paper;

[11] determine on which pages of the sheet and on which sheets the markers are to be drawn (this issue will be discussed in chapter 4.9. Placing drawn markers on selected sheets and pages);

[12] determine the colors of the markers.