Documentation

This page has been automatically translated from Polish with the help of DeepL.
We appreciate your understanding if any translation errors occur.

4.4. Subpanel CUT-OFF LINES

1. Licensing options and technical support – expand

1. Commercial version – licensing method
2. Technical support

2. About the Impozycjoner B program – expand

      1. Variant B of the Impozycjoner program
      2. Getting started with the program
      3. Program interface

3. Detailed overview of tool panels – expand

      1. F1 IMPOSITION FILES panel
      2. F2 IMPOSITION PARAMETERS panel
      3. F3 SEQUENCE OF SIGNATURES/SHEETS panel
               1. Exception table
               2. Example entries in the exception table
               3. Additional function of the Exception Table
               4. Reverse numbering of signatures and sheets
               5. Sequence of sheets in the signature
      4. F4 CREEP REDUCTION panel
      5. F5 SPACING BETWEEN COLUMNS/ROWS panel
      6. F6 OUTPUT FILE panel
      7. F7 GRAPHIC ELEMENTS ON THE IMPOSITION SHEET panel
      8. F8 FINAL OPTIONS panel
      9. Saving the imposition project
      10. Imposition templates

4. F7 GRAPHICAL ELEMENTS ON THE IMPOSITION SHEET panel

      1. Subpanel CUTTING MARKERS
      2. Subpanel FOLD MARK
      3. Subpanel COLLATION MARK
      4. Subpanel CUT-OFF LINES
      5. Subpanel TEXT FRAMES
      6. Subpanel CODES
      7. Subpanel GEOMETRIC FIGURES
      8. Subpanel ELEMENTS IN PDF FORMAT
      9. Subpanel DENSITOMETRIC STRIPS
      10. Subpanel SIDE GUIDE MARKERS
      11. Subpanel REGISTRATION MARKS
      12. Subpanel OFFSET PLATE COLOR MARKINGS (SEPARATION)
      13. Positioning of texts, codes, figures and PDF elements on the imposition sheet
      14. Placing drawn markers on selected sheets and pages

5. Folding scheme management – expand

      1. List of folding schemes
      2. Missing folding schemes
      3. Editing folding schemes

4.4. Subpanel CUT-OFF LINES

Important! The F7 GRAPHICAL ELEMENTS ON THE IMPOSITION SHEET panel can be enabled or disabled depending on whether the Activate the panel switch is selected or not. If this panel is disabled, none of the graphical elements specified in this panel will be drawn.


In this panel, you can enable drawing vertical and horizontal lines from one edge of the paper to the other edge of the paper, indicating: column and row edges; print area edges; margin adjustment lines; lines marking the center of the spaces between columns and rows (for these lines, you can limit their length; a value of 0 means that they will be drawn from edge to edge). Each line can be drawn from edge to edge of the paper or have a specified length. Lines of a specified length can be drawn at the edges and in the center of the print area. In addition, each vertical line can be offset to the right or left, and horizontal lines can be offset up or down. The offset values are specified for the recto. Cut-off lines are drawn symmetrically to the lines drawn on the verso (vertical – when the sheet is fed through the side guide, horizontal – when the sheet is fed through the front guide). As with cut markers, you can define the pages and sheets on which the cut-off lines will be drawn, as well as their thickness and color.

In this panel, you can enable drawing vertical and horizontal lines from one edge of the paper to the other edge of the paper, indicating:

column and row edges;
print area edges;
margin adjustment lines;
lines marking the center of the spaces between columns and rows (for these lines, you can limit their length; a value of 0 means that they will be drawn from edge to edge).

Each line can be drawn from edge to edge of the paper or have a specified length.

Lines of a specified length can be drawn at the edges and in the center of the print area.

In addition, each vertical line can be offset to the right or left, and horizontal lines can be offset up or down. The offset values are specified for the recto.

Cut-off lines are drawn symmetrically to the lines drawn on the verso (vertical – when the sheet is fed through the side guide, horizontal – when the sheet is fed through the front guide).

As with cut markers, you can define the pages and sheets on which the cut-off lines will be drawn, as well as their thickness and color.